FlexNet driver documentation
BayCom PAR96/PICPAR modem driver
Command line parameters:
PAR96 [<LPT>] [/p=<port address>] [/i=<irq>]
'c': enable software DCD
Driver for Baycom's FSK modem connected to an LPT interface .LPT1-x
may be specified directly, other port adresses or IRQ numbers are optional.
Only 9600 Baud half duplex is supported. The driver features a software
DCD, but it is more reliable to use a hardware squelch and disable this
option. See the documentation that came with the modem.
Warning: The statistics does not recognize any TX or RX errors because
the hardware does not allow that. Some experimenting is required to know
if the computer or the configuration in conjunction with the other channels
allows an error free operation.